Interesting Articles 2024

A simple version of a homemade corner clamp

To make such a clamp, you need simple and affordable materials: three pieces of the corner 30x30 mm 15 cm long, two round rods 6-8 mm in diameter and 25 cm long, as well as a long stud and nuts. From the tool you will need a grinder with a cutting wheel, an electric drill and a welding machine. A home-made clamp made of steel corners is durable and reliable, as well as simple in terms of design.

Read More

Recommended

The center for a cauldron from a gas cylinder do it yourself

Need a hearth for a cauldron? It can be made from an old propane tank with your own hands. It will turn out cheaply and cheerfully, and also also conveniently. Observe safety precautions when cutting a cylinder! First of all, the master marks the location of the cut and cuts off the upper part of the gas cylinder. We remind you again that you need to be careful - before cutting the cylinder with a grinder, fill it with water.

Cookies for loved ones

The most pleasant, warm and exciting moments are the minutes spent with loved ones and loved ones. And what could be better than a cup of hot excitingly aromatic coffee in the morning with cream and homemade cookies with your family. We present you an original recipe for a delicious chocolate chip cookie, which will be ideal both for breakfast, and as a small presentation.

A simple home-made conductor for box connections

Direct spike connection, which is often used when assembling boxes, although it is considered quite simple, is characterized by a "capricious disposition". In this case, it is extremely important to observe accuracy. Therefore, it is obvious that it is very problematic to make a quality thorn-groove joint by hand. It is better to use a milling cutter and a homemade device - a jig for box connections.

Simple screwdriver clamp for wire clamps

In a private house or in a summer cottage, you often have to deal with the connection of an irrigation hose to a pipe or tap. This is usually done very simply: put on the hose tightly, tighten it with a hose clamp, and then you can turn on the water. However, sometimes there are no clamps of the required diameter at hand, and then you have to tighten with wire.

How to upgrade a highchair

If you have an old wooden stool of small size lying around, then it can be restored in a simple way and using all available materials. Our story was this: in our country house was an exiled highchair. He is almost forty years old (such antiquity!), But still quite strong. And then the idea came to arrange this centenarian.

Popular Posts

How to make a rubber ink in 5 minutes with your own hands

Rubber on automobile tires "grows old" over time, as a result of which it acquires an ugly grayish tint, which does not affect the presentability of a car in the best way. However, this can be very easily fixed using a homemade rubber dye for “cosmetic restoration”. This tool can be prepared in just 5-10 minutes.

Compact folding storage organizer

Do you need screws, screws, nuts, washers, screws and other small things in your home workshop to be always at hand, while not taking up a lot of space on the table? To do this, we recommend that you make your own hands-on compact folding organizer for storing hardware and various small things.

Page for a children's book in pop-up style

Like many other paper crafts, pop-up creations quite often become real works of art. Complex, multifaceted, colorful, they attract the attention of adults and children. However, the secrets of pop-up are not as complicated as it seems at first glance, and parents can easily make postcards or even a whole book for a child.

Oil lamp

It often happens that the electricity is suddenly turned off and there are no paraffin candles on hand. In this case, the oil lamp will be the optimal solution to the problem. In order to make a lamp on oil we need: 1. An old burned out bulb (You can buy a new one). 2. A set of tools. 3.

New Year card with Christmas tree inside

We all perfectly remember the magical children's books in which there are three-dimensional images. Why not use this technique to make New Year's cards? In the presence of a small amount of time, simple devices and using simple tricks, you can get an amazing New Year's panorama card with a voluminous internal image of a Christmas tree.

Bench grinder with electric drill

There is no way to make a grinder for a home workshop or buy a grinder? Well, for the first time you can get by with the most primitive option. In this review, the author shows how to make a do-it-yourself bench grinder with an electric drill drive. As the basis for the grinding machine, you can use a piece of plywood with a thickness of 20 mm.

One way to use a angle saw with a saw blade

In this review, the author suggests making a simple device from a profile pipe with his own hands. With the help of this homemade product, he performs even cuts with a saw blade. Of course, putting a wood drive on a grinder is unsafe, and we do not urge anyone to do this. However, if you are already using a angle grinder with a saw blade, then this homemade product may come in handy.

Mount on the grinder for installing several brushes for metal

Thanks to homemade mounting on the grinder, you can install several brushes for metal at the same time. This allows you to quickly cope with the cleaning of large steel sheets from rust, dirt and traces of paint. In this case, the so-called twisted cones with wire brushes for grinders are used.

8 helpful tips for working with wood

When working with a tree due to inexperience or due to the lack of suitable tools, sometimes unforeseen situations arise, from which somehow you need to get out. If the self-tapping screw is screwed 1. The screw that you are going to screw into the pre-prepared hole turns out to be smaller in diameter and does not hold in the place intended for it.

An original way to design a garden wooden table

The first thing you will need to do is the table itself - for this we disassemble the wooden pallet into separate boards. Then we pull out the nails, make markings, cut to size and grind the surface of the boards with a grinder. After this, the frame of the wooden garden table from the tsar is assembled in the form of a rectangular box, the legs are made and the countertop is recruited.

How to make a good-quality chicken coop with your own hands

Each owner who keeps chickens is interested in the birds growing quickly and laying a lot of eggs. This is not difficult to achieve - you just need to create all the necessary conditions. Particular attention should be paid to the place where the hens are kept. It should be spacious, convenient and comfortable.

The mode "milk porridge" in the POLARIS multicooker

So, after listening to my friends and acquaintances that this is a miracle device, I decide to keep up with them and also get this miracle machine. In general, I chose - I chose, I chose a POLARIS multicooker. This model was relatively reasonable, namely about four thousand rubles. Of course, I have no experience in choosing household appliances, but if you are still faced with a choice and want to buy this unit, then I sincerely do not advise you to take this model as I have.