We sew a toy pallet for shadows from felt

Pin
Send
Share
Send

There are probably no girls who, each at one time, would not be interested in cosmetics. Numerous jars, boxes, tubes and bottles of mother’s cosmetic bag sometimes fascinate little beauties even more than beautiful dresses, shoes or hair clips.
To satisfy this interest, without resorting to real cosmetics, you can sew toy cosmetics, for example, from felt. Then the little daughter can safely try herself as a makeup artist, and the mother-needlewoman will be calm for the health and beauty of her princess, without fear of all kinds of allergies.

In order to sew, for example, a palette for shadows, you have to stock up on the following tools and materials:
  1. Sewing machine;
  2. Needle for hand sewing;
  3. Scissors for cutting;
  4. Ruler;
  5. Pencil;
  6. Paper;
  7. Ballpoint pen for transferring patterns to felt;
  8. Glue "Moment transparent";
  9. Threads for sewing;
  10. Soft felt lilac color (for palettes);
  11. Hard white felt (for palettes);
  12. Multi-colored trimmings of hard felt (for shadows and brushes);
  13. Sew button small diameter;
  14. Thin synthetic winterizer;
  15. Slanting inlay is white (finished or independently prepared).

On a sheet of paper, draw a template for the future palette, - a square with a side of 10 cm and rounded corners.
According to this pattern, you need to cut 2 parts of white felt. Seam allowances do not need to be added.
From purple felt, you need to cut 2 squares with a side of 11 cm.
From sintepon it is necessary to cut 2 squares with a side of 8 cm.

9 small squares should be cut out from scraps of multi-colored felt, - an imitation of shadows, - 2 * 2 cm in size. It is better if they are several shades of the same color. Then the palette will look like a real one.
Harvested "shadows" should be sewn onto the base of a palette of white felt. For convenience, they can first be glued with a drop of transparent glue.
The indents for marking the location of the shadows are as follows: from the sides - by 1.5 cm, between the squares - by 0.5 cm.

On the second part of the palette made of white felt, you need to sew a pocket for tassels, cut in the form of a rectangle with dimensions 8 * 3 cm.
Indentation for marking the location of the pocket: bottom - 1, 5 cm, on the sides - 1 cm.

Each part of the palette of white felt needs to be laid on a blank of lilac felt. Between these layers, looking the wrong side of each other, it is necessary to put a synthetic winterizer.
The whole "pie" must be fastened with an auxiliary line, passing along the edge of the details of white felt.

Excess lilac felt must be cut off.

Each part of the palette must be edged with a white oblique tie.
For the convenience of performing this operation, the tape can be noticed beforehand. Then it must be sewn with a straight or zigzag line, and the notch lines should be removed.
If necessary, the edging can be neatly ironed.
The ends of the tape do not need to be sewn together. It is enough to sew them butt to each other.

2 white rectangles 7 * 2 cm in size should be cut out of white felt.
These blanks will connect the sides of the palette.
Using glue, the rectangles must be glued to the sides of the palette, masking the joints of the oblique inlay. After the glue is taken, a machine line should be laid along the edges of the rectangles.

On the front side of the palette you need to sew one part of the button.
The second part of the button should be sewn to the prepared and stitched on the back side of the strap.
Himself a cut in a cut is a rectangle 6 * 1.5 cm, folded in half and stitched around the perimeter at a distance of 1 mm from the edge.

Then you need to prepare brushes for eyeshadow.
From paper, you can first make a template. In form, she can absolutely anyone. The optimal size will be a brush inscribed in a rectangle with dimensions 5.5 * 2 cm.
According to the pattern, 3 blanks of the brush of different colors should be cut.

Of the usual sewing threads you need to make "bristles" for the brushes by gluing them from the wrong side of the blanks.

Next, each blank must be glued inside on white felt.

Then the brush should be sewn around the perimeter with a small line.
Excess white felt must be cut.

The front side of the palette, if desired, can be decorated with felt flowers and circles.
Toy palette for eyeshadow for your beloved daughter is ready! It's time to start the game!

Pin
Send
Share
Send

Watch the video: Felt Project Share (November 2024).