Share
Pin
Tweet
Send
Share
Send
To work, we need:
coins of small denomination (kopeks, five kopeks); a spoon, fork, or other vertical-looking device that acts as the holder of the structure; a cup; saucer; electrical tape or adhesive tape (you can use a thermal gun for fixing); glue; instruments.
First, bend a spoon or fork with pliers (in this case, a mini-ladle was used, but not everyone has it) so that one part of the cutlery is curved in one direction, the other, respectively, in the opposite direction.
This is the future frame of the product. It can be wrapped with electrical tape.
Next, tape should attach the top of the cutlery to the cup, the bottom to the saucer.
It is important that the parts are tightly attached - the structure must be stable.
Then it’s worth putting glue on the saucer. Pour some coins there, having built a slide. With the cup repeat the same manipulations. Wait a bit until the coins freeze.
Then, stick the coins along the cutlery’s trunk, so that it looks like a flowing stream of money.
Now your cash waterfall - the soaring cup is ready!
You can give such a waterfall as a souvenir to someone, or you can safely put it at home as an ornament.
Share
Pin
Tweet
Send
Share
Send