HOMEMADE BOLT WOOD CUTTER

Send

When a cutter is really needed, but there is no opportunity to purchase, then you can make it yourself. An interesting and simple idea to use an ordinary bolt for crafts.

One of the main tasks is to make a hole for a small drill in the center of the bolt, which should fit tightly inside, leaving a small part for alignment from the outside. Next, the metal is cut off from the cap of the bolt at an angle by a grinder, giving the hexagon the shape of the cutter.

After processing, a homemade nozzle must be clamped in the drill chuck and tested on an unnecessary piece of wood. If necessary, the bolt can be modified, and for the center drill, use a broken one.