Good wired headphones are cumbersome and take up a lot of space on the table. However, there is a simple idea where they can be attached.
If the farm has a long-lived bicycle, or rather an asterisk with a lever for the pedal, then by means of its short transformations you can make a convenient and beautiful stand.
First you need to separate the lever from the sprocket with a grinder at the very base. Then the sprocket is clamped in a vice and grinding of the cut is performed.
Inside it there is a sleeve into which a separated lever is then inserted. They need to be welded together, after which the place of welding can be given a more aesthetic appearance with a grinder.
The process of making the stand
The upper lever ring should be cut in approximately half. Three pieces are cut from a metal strip in the amount of three pieces (7-9 cm long).
One will be welded to the slice of the lever, and the other two (with slightly bent upward edges) to it itself perpendicularly. Welding points should also be leveled.
At the final stage, the product is painted. If you have a bicycle chain, you can put it on an asterisk and rivet the gap. The result was an elegant stand! Now the headphones will not roll anywhere.
For details on how to make a homemade headphone stand from a bicycle sprocket, we recommend that you watch in the video on our website.
