From old car numbers and chipboard or plywood scraps, you can make a simple tool box. Moreover, to implement this idea will require a minimum of time.
To make a carrying case, you will need three pieces of plywood or chipboard, as well as two old car numbers.
And the first thing you need to mark the plywood and cut two walls. The third piece is used as the bottom of the box. For sawing, the master uses an electric jigsaw.
The main stages of work
At the next stage, it will be necessary to polish the edges of the resulting workpieces, as well as drill holes for screws. Then the master begins to assemble the tool box. And for this it is better to use a screwdriver so as not to twist the screws with your hands.
Next, you need to drill holes along the edges of license plates, after which they will need to be screwed to the main frame of the box.
At the last stage of work, it remains only to make a round wooden handle and screw it to the box. The original tool carrier is ready! As they say - cheap and cheerful. And from what was at hand.
For more information on how to make a simple toolbox from old car numbers, you can see the video on our website.
