Do not know where you can adapt the trimming of profile and round pipes? Make yourself a universal 3-in-1 wall-mounted horizontal bar simulator that can be installed at home and in the apartment.
The design of the simulator is very simple, but at the same time you can perform a whole range of physical exercises on it, from pulling up to pumping the press.
First of all, it is necessary to draw a drawing on paper, which you will be guided in the process of work. After this, it is necessary to cut into the size of the workpiece for the manufacture of the horizontal bar - round and profile pipes.
The main stages of work
From rectangular shaped pipes we weld two sides of the horizontal bar. Each sidewall consists of three pieces of profile.
Two segments are welded at right angles, the third - acts as a jib (this is an indispensable element that will add structural rigidity).
Two horizontal bar sides are connected together using a pair of lintels from a round pipe welded from the inside.
After that, you will need to weld the horizontal bar of the horizontal bar itself, having previously bent the edges a little (it is also made of a round pipe, but with a larger diameter than the jumpers).
At the last stage, the fasteners from the plates are welded so that you can then install the armrests and support for the back. The author also welds the palm rest.
Then it remains only to strip the metal (including welds) and paint. Mounts are installed in the wall, on which the horizontal bar will be hung. That, in fact, is all.
You can watch the detailed process of manufacturing a universal wall horizontal bar-simulator for home in the video on the website.
