Share
Pin
Tweet
Send
Share
Send
In addition to the magazine pages, we will need scissors, a pencil and a ruler, a thin knitting needle, glue and thick cardboard for the base.
-Cut sheets into rectangles 10x12 cm in size.
- Tightly wrap the workpiece over the spoke, starting from the corner.
-Gently glue the tip of the paper sheet and remove the tube from the knitting needle.
- We get such blanks.
- From a fairly dense cardboard we cut out the base of the craft. The frame can be square, rectangular, oval.
-Lubricate the cardboard with glue and place paper tubes on it. Workpieces should fit tightly with a slight allowance at the edges.
-As they dry, the protruding edges of the tubes can be neatly trimmed around the perimeter of the base.
- Tightly glue the entire surface of the future photo frame with tubes and carefully trim the protruding parts. For strength, the front side of the product can be coated with any available varnish or PVA glue, diluted in half with water. Glue a sheet of thin cardboard on the back so that there is free space to replace the photo.
Our original photo frame is ready.
Share
Pin
Tweet
Send
Share
Send