Home slippers-boots

For warm home slippers (boots) we need:
- Patterns, I took from the Internet;
- Rubber;
- Fleece, I took a leopard print;
- fleece for the inside of the boot, I took a light green color;
- synthetic winterizer;
- Fleece black - for toe and heel;
- Leather, for the foot;
- Threads of light green color;
- Threads of black color.
1. First of all, before we start sewing cozy slippers, we need to cut out all the details we need. We take patterns and we begin to cut on them. We take the main part of the pattern and cut it out of leopard fleece, but since I decided to make high slippers, we increase the height of the pattern by 30 centimeters from taking the foot on this part. such details are obtained. From this main part we cut the heel (by eye).
2. The sock detail should also be divided, as the sock will also be black. We cover the details of the toe and heel.
3. From the skin and light green fleece we cut the feet.
4. According to the pattern of the main part, we cut a detail from light green fleece, but not already 30 cm high, but 20 from the take-off and without cutting off the heel.
5. We cut a sock from light green fleece, also without cutting off a sock.
6. We cut from synthetic winterizer exactly the same details as from light green fleece. Stop, Sock and main part.
7. We begin to assemble our product. First, we sew the synthetic winterizer to the details of the inside of the boot. Sew to the toe.
8. Sew the synthetic winterizer to the foot.
9. It remains to sew the synthetic winterizer to the main internal part of the product.
10. Now we begin to sew the parts of the inside of the product. that is, we take the sock and sew the boot with the main part.
11. Turn the resulting part in half and stitch the seam, leaving the opening not wired, so that you can then turn the product.
12. Sew on the sole.
The result was a boot for the inside.
13. Now we take the main part of the leopard fleece and draw on it at equal distance lines. We will sew rubber to these lines. so that in these places our boot is pulled together.
14. We cut pieces of rubber, 1 piece of 29 cm, and 2 pieces of 26 cm. These sizes are taken from the calculation of our boot. That is, its width is 32 cm. We sew the long rubber on top, since the leg is wider on top. than the ankle.
15. Sew the rubber along the drawn lines, while stretching it. That's what we got.
16. Sew the toe. We take the black part of the sock and the leopard, we sew together. First, chipping with needles. for easy sewing.
17. So that the seam does not interfere with walking, we sew it to the part with a finishing seam.
18. Sew the resulting part with the main part.
19. Fold in half and sew the back seam.
20. To the resulting sew a black heel. And in the same way we sew a finishing seam.
21. Sew foot in leather.
22. Now we sew the inner and outer boot.
23. In the toe and heel, we make three fasteners to make it more convenient to remove and at the same time the internal part does not stray.
24. We turn on the front side and sew up the opening.
25. We sew the finishing seam so that the inner boot does not go astray.
In the same way we make the second slipper.
Home warm slippers, boots are ready! Warm and cozy days and evenings!

Watch the video: Crochet slipper boots for women & men (November 2024).