UPHOLSTERED CHAIR MADE OF PLASTIC BOTTLES

Send

To make a soft chair out of plastic bottles, you will need:
• plastic bottles of 1.5 liters - 24 pieces;
• adhesive tape;
• scissors;
• wooden box for vegetables;
• knife;
• unnecessary sweater;
• foam rubber;
• a flap of fur;
• threads;
• needle.
The required number of plastic bottles is divided in half, half of them cut off the upper part with a cork and throw it away. The remaining bottom blank is put on a whole bottle. 12 pieces are assembled of such parts. Now, every three parts are fastened to each other with adhesive tape, you should get 4 rectangular blanks.

Prepared bottles are inserted into a wooden box, pressed tightly and secured with adhesive tape in this condition. If the bottles are selected with the indicated capacity, they sit firmly in the box, and additional fastening is not required.

Next, a chair cover is prepared from any obsolete sweater. The upper part with sleeves is trimmed, and the lower part is put on a chair.
A rectangle with sides of 30 and 40 cm is cut out of a piece of foam rubber of any desired thickness. To tighten the seat, a flap of fur 46 * 56 cm in size is cut. At the corners, the fur is cut at a right angle and sewn, as shown in the photo. The prepared cover is put on foam and placed on a stool. At the corners, the cushion is attached to the fabric of the sweater with a thread with a needle.