CARD SUIT EARRINGS

Send

We will need:
- paper for quilling in two colors;
- a toothpick;
- PVA glue";
- scissors
- Moment glue (transparent);
- metal rings for fastening;
- hooks-holders for earrings.

Each earring consists of two elements depicting a card suit. Since each element consists of a different number of parts, the length of paper used must be different. If we take the same length, then the twist density in different parts of the earrings will be very different.
1. We begin with the element "hearts". It consists of one part, so I use the full length of the paper. We wind on a toothpick. In this case, it is better than a quilling tool, because we need a not very tight twist. We twist the paper, remove it from the toothpick and give it a heart shape. Glue the tip with glue "PVA".

2. The element "clubs" consists of four parts. We use paper half shorter. Twist the three elements of the type "drop" and one triangle. Glue them together. For the "drop" elements, I used PVA glue. To stick the triangle, I use the “Moment” glue, since the contact area is small, and you need to bond it well.

3. Now it remains to make the connecting rings of paper. They should be subtle, so I twist them out of paper, cut in half lengthwise. I also glue the moment glue to the main parts. Since the gluing area is different, somewhere for reliability you will have to glue the full face, and somewhere sideways. This is not reflected in the beauty of the earrings, since the detail is insignificant.

The second earring is made in a similar way. The "spades" element consists of three parts, and the "diamonds" of one part. It is necessary to ensure that all details of the earrings are approximately the same in size. It’s easier to make one detail and compare with it.